JBD LiFePO4 Smart BMS 4S 12V 100A 200A Same Port Balance With UART RS485 
JBD LiFePO4 Smart BMS 4S 12V 100A 200A Same Port Balance With UART RS485

JBD LiFePO4 Smart BMS 4S 12V 100A~200A Same Port Balance With UART RS485

114.00$ – 128.00$

The lifepo4 smart BMS has a balancing function to keep each battery in balance, which can prolong the life of the battery. The intelligent communication port can realize important functions such as real-time battery monitoring, automatic balancing, and intelligent charging and discharging. While ensuring battery safety, it can effectively improve battery utilization.

Secure Checkout
WORRY FREE SHOPPING
Free shipping
Secure payment
Reliable warranty

Features

Intelligent control
LifePO4 Smart BMS can monitor and feed back battery capacity, voltage, temperature and battery parameters in real time
Security
LifePO4 Smart BMS can actively balance the voltage and other states between single batteries to avoid overcharging and excessive heating of the battery.

JBD LiFePO4 Smart BMS 4S 12V 100A 200A Same Port Balance With UART RS485 (5)JBD LiFePO4 Smart BMS 4S 12V 100A 200A Same Port Balance With UART RS485 (6)JBD LiFePO4 Smart BMS 4S 12V 100A 200A Same Port Balance With UART RS485 (7)

Applications

LifePO4 Smart BMS are mainly used in li-ion power batteries and energy storage lithium vattery.Widely used in electric scooter,e-bike,tourist sightseeing vihide,electric tricycle,low speed ev,emegency UPS,solar street light,RV& Home energy storage ect.

Wire connection mode

JBD LiFePO4 Smart BMS 4S 12V 100A 200A Same Port Balance With UART RS485 (2)

1. First connect the B- wire to the total negative pole of the battery, and then connect the cable
2. Start wiring from BCO, BC0 is connected to the total negative electrode of the battery, the second cable BC1 is connected to the positive electrode of the first series of batteries, the third cable BC2 is connected to the positive electrode of the second series of batteries, and so on.
3. After connecting the cables, measure the voltage between each two adjacent cables. The voltage of the iron-lithium battery should be less than 3.5V. After checking, insert the cable.

Specifications

JBD BMS-SP04S034 LiFePO4 UNIT
The Basic Parameters Nubmer of Srtings 4 S
Charge Current 100 120 150 200 A
Discharge Current 100 120 150 200 A
Charge Voltage 3.6 V
Working Temperature -30/70 ℃
Size 192*20*105 mm
Charge Protection Overcharge Protection Voltage 3.75±0.05 V
Recovery Delay Time 1000-3000 mS
Overcharge Protection Recovery Voltage 3.6±0.05 V
Discharge Protection Over-Discharge Protection Voltage 2.5±0.1 V
Recovery Delay Time 1000-3000 mS
Overcharge Protection Recovery Voltage 3±0.1 V
Balanced Protection Equalizing Opening Voltage 3.4 V
Equalization Relief Voltage 3.4 V
The Equilibrium Current 100-200 mA
Over Current Protection Overcurrent Protection Value1 120-230 A
Delay Time of Overcurrent Protection Value1 20 S
Short Circuit Protection Delay Time of Short Circuit Protection 200-800 uS
Recovery Short Circuit Protection Turn off The Load
Temperature Protection Charging High Temperature Protection Value 70±2 ℃
Charge Low Temperature Protection Vatue -5±2
Discharge Hightemperature Protectionvalue 75±2
Discharge Low Temperature Protection Value -10±2
Shopping Cart
Scroll to Top