LifePO4 Smart BMS can monitor and feed back battery capacity, voltage, temperature and battery parameters in real time
LifePO4 Smart BMS can actively balance the voltage and other states between single batteries to avoid overcharging and excessive heating of the battery.
LifePO4 Smart BMS are mainly used in li-ion power batteries and energy storage lithium vattery.Widely used in electric scooter,e-bike,tourist sightseeing vihide,electric tricycle,low speed ev,emegency UPS,solar street light,RV& Home energy storage ect.
Wire connection mode
1. First connect the B- wire to the total negative pole of the battery, and then connect the cable
2. Start wiring from BCO, BC0 is connected to the total negative electrode of the battery, the second cable BC1 is connected to the positive electrode of the first series of batteries, the third cable BC2 is connected to the positive electrode of the second series of batteries, and so on.
3. After connecting the cables, measure the voltage between each two adjacent cables. The voltage of the iron-lithium battery should be less than 3.5V. After checking, insert the cable.